 |
|
|
|
||||||
|
Hardware...
|
|
SR Batteries |
|
 |
Gapless
Hinge Tape, $5.95 We developed this special hinge tape with the help of 3M. It sticks like crazy and bends very easily without being flimsy. This is the hinge tape that is supplied in all of our MicroLaser Cut kits. A set of SR Gapless Hinge Tape includes four, 20" lengths of tape. |
|
|
|
|
|
Lexan
Laser Cut Landing Gear Straps (8), $4.95 These are the same Lexan laser cut landing gear straps that are supplied in our MicroLaser Cut kits. Being clear, they blend right in with the color of your aircraft. |
|
|
|
|
|
Switch Face Plate & Mounting Screws,
$4.95 For some strange reason, most R/C switches come without face plates and mounting screws. We decided to fix this so we're making up laser cut clear Lexan switch face plates. Being clear, they blend right into the color of your fuselage. If you'd like, you can also paint them any color you'd like on their backside. We also include two mounting screws which are almost impossible to find anywhere else. |
|
|
|
|
|
Dubro |
 |
Mini
Kwik Links (2), $1.95 As supplied in our MicroLaser Cut kits, these nylon Mini Kwik Links are small and work great. Use them with the 2-56 Threaded Couplers below. |
|
|
|
|
 |
Threaded
Couplers (2), $1.95 These 2-56 Threaded Couplers can either be soldered or epoxied to the end of a 1/16" or smaller pushrod so that it can be used with the Mini Kwik Links above.
|
|
|
|
|
 |
1/2A
Control Horns (2), $1.95 These are the same 3/4" long nylon control horns supplied in SR MicroLaser Cut kits. They have four adjustment positions and include backing plates and mounting hardware.
|
|
|
|
|
|
Sig |
 |
Mini
Strip Aileron Horns (2), $4.95 These are the Mini Strip Aileron Horns supplied in SR MicroLaser Cut kits. The set consists of one right and one left strip aileron horn. |
|
|
|
|
 |
1/2A
Wheel Retainers (4), $1.95 If you're using 1/16" wire landing gear, this is the easiest, simplest, and lightest way to keep the wheels in place.
|
|
|
|
|
 |
7"
Canopy, $2.95 This is the clear, 7" canopy supplied with the SR X250 MicroLaser Cut kit. |
|
|
|
|
 |
1"
Wide Glass Cloth (24" length), $1.95 Use this glass cloth with either CA or epoxy glues to secure things in place or reinforce wing center section joints.
|
|
|
|
|
 |
1/16"
Eyelets (8), $1.95 Use the eyelets on 1/16" wire landing gear or for finishing off wire loops in thinner wire.
|
|
|
|
|
|
Dave
Brown |
 |
1.75"
Custom Ribbed UltraLite Wheels We had Dave Brown make these wheels just for us. What makes them special is their extremely light weight and that they are set up for 1/16" wire landing gear. They simply work great! 1.75" Custom Ribbed UltraLite Wheels (3), $12.95 2.25" Custom Ribbed UltraLite Wheels (2), $10.95 |
|
|
|
|
|
K&S |
 |
3/32"
Aluminum Tubing
(12"), $1.95 This is the aluminum tubing used to reinforce wire pushrods in SR MicroLaser Cut kits (see the "Z" bend pushrods below). It allows you to use the right wire size to fit your servo's output arm yet have a light weight pushrod that won't flex easily.
|
|
|
|
|
 |
3/64"
"Z" Bend Music Wire Pushrod (18"), $2.50 If you've had trouble making your own "Z" bend pushrods, we'll do it for you. This is an 18" length of 3/64" wire with a "Z" bend preformed at each end. Cut the 18" length anywhere in the middle and you'll have to "Z" bends ready to use. This is the perfect match for the aluminum tubing above. |
|
|
|
|
|
Micro
Fasteners |
|
5/64"
Socket Screws, 7/16" Long (16), $3.95 Are you tired of having a screwdriver slip off the head of a screw and end up putting a hole in your aircraft? Well we were so we went out and found these 7/16" long socket screws that eliminate the problem. You'll find dozens of applications for them and never be aggravated again. 5/64” Ball Driver, $6.95 |
|
|
| ©
Copyright 1998 - 2004 SR Batteries, Inc., Box 287, Bellport, New York
11713-0287Phone: 631.286.0079 Email: office@srbatteries.comAll rights reserved. No portion may be reproduced in any waywithout written permission from SR Batteries, Inc. |
