Modeling Tools


		Foremost Miter Cutter, $19.95 The Foremost Miter Cutter allows you to make precise end cuts in sticks and dowels. It's calibrated in 1 degree increments from 0 to 90 degrees. For cutting, it uses an easily replaced single edge razor blade. This is a must have modeling tool!

		5/64" Ball Driver, $6.95 If you're using some of our 7/16" long, 5/64" socket head screws, you need a ball driver for them and this is it. It won't slip out of the head of the screws putting hold in your aircraft!